Creating a CBAM Process

Creating a CBAM Process

A process represents a production process at your installation: the part of the plant where goods of one aggregated goods category are produced. You define what goes into the process and what comes out. Processes are used with the Process Approach.
If your organization uses the Bubble Approach, you do not need to define processes. See "Choosing the Bubble or Process Approach".

Create a process

  1. Select Process in the side menu of TSC CBAM Exporter. Click Here
  2. Click + Process.
  3. Choose the Process Type:
    1. CBAM Templates (recommended) – ready-made templates for standard processes (coming soon)
    2. Custom Process – define your own inputs and outputs
  4. Enter the Process Name and Description.
  5. Under Input category types, select what the process consumes: Fuels, Electricity Consumed, Heat, Process Emissions, Precursors Consumed or Products.
  6. Under Output category types, select what the process produces: Precursors Produced or Products.
  7. Complete each input and output card (see below).
  8. Click Create.
A process needs at least one input and one output.

Inputs

InputWhat to enter
FuelEach fuel burned, for example natural gas, coking coal or diesel oil.
Electricity ConsumedThe Source of Electricity (for example Grid (Received from the grid)) and the Country of Production.
HeatThe Source of Heat.
Process EmissionsThe IPCC Process Activity, for example 2.A.1 Cement production or 2.C.3 Aluminium production, and the Parameter / Technology.
Precursors ConsumedEach precursor, where it comes from (Source At: self produced within this route, self produced in a separate route, or purchased from a supplier), its Country of Origin and its production method.
ProductsCBAM products used as inputs.
For every input and output, choose Measured At: Process Level if it is measured for this process, or Installation Level if it is measured for the whole installation and must be allocated.

Outputs

  1. Precursors Produced – precursors made by this process, with their Treatment Type: Exported out of process or Consumed in production route.
  2. Products – the CBAM products that leave the system boundary.
Process emissions are emissions from chemical reactions, such as the calcination of limestone, as opposed to fuel combustion. Include them where your process has them.
Quantities are not entered here. You enter them when you calculate emissions.

Related articles

  1. Creating a Production Route – link products and processes to a standard CBAM route.
  2. Calculating CBAM Emissions – run an emissions calculation for an accounting period.
  3. CBAM Key Concepts for Exporters – installations, processes, routes, precursors and embedded emissions.
  4. Adding CBAM Products – register your products with their CN codes.