Completing Your Monitoring Methodology Document (MMD)

Completing Your Monitoring Methodology Document (MMD)

The Monitoring Methodology Document (MMD) describes how your installation's emissions data is tracked and calculated for CBAM. Under the EU rules, every operator must keep a written monitoring plan in English that is clear enough for an independent expert to follow. Your verifier will review it. The MMD in TSC CBAM Exporter helps you build this document.
The MMD is mandatory for audit purposes. Complete it before your verifier's site visit, and review it at least once every reporting period.

Open the MMD

Select MMD Set-up in the side menu of TSC CBAM Exporter. You can also click Go to MMD in the Guidance & Progress panel. Click Here
The header shows who created and last edited the document, the MMD Year, the Version and the Status, and a progress bar showing how many of the nine sections are complete.

The nine sections

SectionWhat to enter
1. Revision & UpdatesA log of all versions, dates and changes. Use Create Version in the three-dot menu to record a new version.
2. IntroductionThe purpose, scope and regulatory context of the document. A default text is provided; adapt it to your installation.
3. About the InstallationFilled automatically from My Installation. Click Edit Installation to change it.
4. BoundariesThe physical and technical boundaries of your plant and each production process: what is included and excluded. Products, processes and routes are filled in automatically.
5. Precursor Materials DataEach precursor used, and whether you use default values or actual data from the supplier.
6. Monitoring MethodologyFor each emission source, whether you use a calculation-based approach (standard method or mass balance) or a measurement-based approach (for example CEMS).
7. Primary Data SourceFor fuel consumption, energy input and raw material input: the primary and corroborating data sources, the justification, the sampling plan and the emission factor databases.
8. Laboratory StandardAccreditation details of the laboratories that test your fuels and materials: name, standard, certificate number, validity and scope.
9. Roles & ResponsibilitiesWho is responsible for data collection and whether they are trained: CBAM Coordinator, Data Collection Officer, Internal Auditor and Management Approver.
Use the attachment icon on any section to upload supporting files (JPEG, PNG or PDF), and the comment icon to add comments. Click Save to save your changes.
With the Bubble Approach, sections 4 and 6 show that your entire production route is treated as a single boundary, so individual processes and routes do not need to be defined.
Use the "Primary Data Source" and "Corroborating Source" columns to show how you cross-check data, for example fuel invoices against meter readings. Verifiers look for these controls.

Related articles

  1. Setting Up Your Installation – the installation details CBAM needs.
  2. Verification of Your CBAM Emissions Data – accredited verifiers, site visits and timing.
  3. CBAM Key Concepts for Exporters – installations, processes, routes, precursors and embedded emissions.
  4. Choosing the Bubble or Process Approach – which calculation approach suits your installation.